Passive Key And Immobilizer System Message Displays

The IPC provides the passive key and immobilizer system message center display to indicate the key is in the luggage compartment, the key is left in the vehicle, no key is detected, accessory power is active, to inform the driver a steering lock fault exists, to press the brake to start the vehicle or to place the key in the backup slot. The IPC uses the push button start message input from the BCM to display multiple message center messages.

The IPC receives the push button start message display data from the GWM over the High Speed Controller Area Network 3 (HS3-CAN).

The GWM receives the push button start message display data from the BCM over the High Speed Controller Area Network 1 (HS1-CAN).