Ignition Switch - Vehicles With: Push Button Start: Removal

1. 1.
   
   Vehicles with touchscreen display. Remove the FCIM. Refer to: Front Controls Interface Module (FCIM) - Vehicles With: SYNC 2/Touchscreen Display . Refer to: Front Controls Interface Module (FCIM) - Vehicles With: Sony Audio System .

1. 2.
   
   Vehicles with touchscreen display. Remove the retainers, disconnect the electrical connector and remove the FCIM.

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   Vehicles without touchscreen display. Remove the FCDIM. Refer to: Front Control/Display Interface Module (FCDIM) .

1. 4.
   
   Remove the push button ignition switch.

   1. 1.
      
      Release the tabs. Use the General Equipment: Interior Trim Remover

   1. 2.
      
      Disconnect the electrical connector and remove the ignition switch.

Courtesy of FORD MOTOR COMPANY