Pinpoint Test - DTC: NN: U0151:00: Notes
Normal Operation and Fault Conditions
The OCSM uses information contained in messages from the RCM sent on the High Speed Controller Area Network 2 (HS2-CAN).
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0151:00 | Lost Communication with Restraints Control Module: No Sub Type Information | This DTC sets if the OCSM does not receive an expected message from the RCM. |
Possible Sources
- Network traffic
- OCSM
- RCM