Symptom Chart(s)
Symptom Chart: Supplemental Restraint System
Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to: Diagnostic Methods .
Symptom Chart
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not respond to the diagnostic scan tool | Fuse Diagnostic scan tool DLC Wiring, terminals or connectors Module |
REFER to: COMMUNICATIONS NETWORK - 2.0L DURATEC - HYBRID (96KW 130PS) . |
| An audible tone sounds within 60 seconds of ignition ON | SRS fault or airbag warning indicator fault | CARRY OUT the RCM and IPC self-tests. For RCM Diagnostic Trouble Codes (DTCs), refer to the DTC Chart: Restraint Control Module (RCM) . For IPC Diagnostic Trouble Codes (DTCs), REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES - 2.0L DURATEC - HYBRID (96KW 130PS) . |
| The airbag indicator is flashing | SRS fault | CARRY OUT the RCM and OCSM self tests. Refer to DTC Chart: Restraint Control Module (RCM) or DTC Chart: Occupant Classification System Module (OCSM) . |
| The airbag warning indicator is illuminated continuously | Fuse Wiring, terminals or connectors IPC RCM or OCSM |
CARRY OUT the RCM and OCSM self tests. REFER to DTC Chart: Restraint Control Module (RCM) or DTC Chart: Occupant Classification System Module (OCSM) . If no Diagnostic Trouble Codes (DTCs) were retrieved from the RCM or OCSM, REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES - 2.0L DURATEC - HYBRID (96KW 130PS) . If the OCSM or RCM does not respond to the diagnostic scan tool, REFER to: COMMUNICATIONS NETWORK - 2.0L DURATEC - HYBRID (96KW 130PS) . |