Brake Vacuum Pump - 2.7L EcoBoost (238kW 324PS): Removal
WARNING: This page is about a different car, the 2017 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the CAC intake pipe. Refer to: Charge Air Cooler (CAC) Intake Pipe .
- Disconnect the vacuum tubes.
- Detach the wiring retainer.
- Remove the bolts and the vacuum pump.
Torque: 89 lb.in (10 Nm)