LEMON Manuals
: Even more car manuals for everyone
Home
>>
Ford
>>
2015
>>
Fusion S
>>
Repair and Diagnosis
>>
Brakes
>>
Mechanical - Hydraulic
>>
Rear Disc Brake System (Except Hybrid/ENERGI)
>>
Removal And Installation
>>
RearBrake Caliper Anchor Plate
>>
Removal
RearBrake Caliper Anchor Plate: Removal
NOTE:
Steps in the removal procedure may contain installation details.
1.
Remove the brake pads. Refer to:
Brake Pads
.
2.
Remove the bolts and the brake caliper anchor plate. Discard the bolts.
Torque: 66 lb.ft (90 Nm)
Courtesy of FORD MOTOR COMPANY