LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Fusion Energi Titanium >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System Actuation (Hybrid/ENERGI) >> Removal And Installation >> Brake Pedal and Bracket >> Installation

Brake Pedal and Bracket: Installation

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    NOTE: Make sure the brake booster rod is positioned correctly into the clevis block.
    NOTE: Apply the brake pedal several times to verify correct operation.
GFD70651Courtesy of FORD MOTOR COMPANY

  1. 3.

    Using the diagnostic scan tool, carry out the Regenerative Brake System Calibration routine.
scientia non olet · About LEMON Manuals