Pinpoint Test BT : U3006:16: Notes
Refer to Instrument Cluster for schematic and connector information.
Normal Operation and Fault Conditions
ICM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | Sets in continuous memory and on-demand in the ICM if the ICM detects battery voltage below 8.2 volts on the voltage supply circuit for longer than 5 seconds if the engine is not running or longer than 250 milliseconds. |
Possible Sources
- Wiring, terminals or connectors
- High circuit resistance
- Charging system concern
- IPC