| Alarm/key programming chime request |
BCM |
Input used for the keyless key programming chime. |
| Alarm mode |
BCM |
Input used for the perimeter alarm chime. |
| Ignition status |
BCM |
Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. |
| Lane keeping system hands off display |
BCM |
Input used for the lane keeping alert warning chime. |
| Parking brake warning request |
BCM |
Input used for the parking brake warning chime. |
| Parking aid active |
Parking Aid Module (PAM) |
Input used for the parking aid chime. |
| Passenger detect status |
OCSM |
Input used for the Belt-Minder ® chime. |
| Passive key status |
BCM |
Input used for the key left in vehicle chime. |
| Passive key out of vehicle |
BCM |
Input used for the passive key not inside of the vehicle chime. |
| Position light indication |
BCM |
Input used for the headlamps on chime. |
| Power mode |
BCM |
Input used for the key-in-ignition warning chime. |
| Safety belt status |
RCM |
Input used for the safety belt component of the Belt-Minder ® chime. |
| Turn indicator command |
BCM |
Input used for the turn signals on chime tone (tick-tock). |
| Vehicle speed |
ABS module |
Input used for the vehicle speed component of the Belt-Minder ® chime, the passive key out of the vehicle chime and the door ajar chime. |