| ABS warning indicator request |
ABS module |
Input used to control the ABS warning indicator. |
| Airbag indicator request |
RCM |
Input used to control the airbag warning indicator. |
| Alarm mode |
BCM |
Input used to control the information indicator based on the PATS and perimeter alarm status. |
| Brake fluid level low |
BCM |
Input used to control the brake warning indicator for the brake fluid level input. |
| Brake warning request |
ABS module |
Input used to control the brake warning indicator for the ABS input. |
| BLIS on |
SODL |
Input used to control the BLIS off indicator. |
| Charging system indicator request |
BCM |
Input used to control the flashing of the charging system warning indicator. |
| Fog lamp indicator request |
BCM |
Input used to control the fog lamp indicator. |
| High beam indicator request |
BCM |
Input used to control the high beam indicator. |
| Ignition status |
BCM |
Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. |
| MIL request |
PCM |
Input used to control the MIL. |
| Oil pressure warning |
PCM |
Input used to control the low oil pressure warning indicator. |
| Parking brake warning request |
BCM |
Input used to control the brake warning indicator for the parking brake input. |
| Passenger detect status |
OCSM |
Input used to control the safety belt warning indicator. |
| Position light indication |
BCM |
Input used to control the lights on indicator. |
| Power system status |
BCM |
Input used to control the charging system warning indicator. |
| Safety belt status |
RCM |
Input used to control the safety belt warning indicator. |
| Stability/traction control indication |
ABS module |
Input used to control the stability/traction control indicator (sliding car icon). |
| Stability/traction control disabled indicator request |
ABS module |
Input used to control the stability/traction control disabled indicator (sliding car OFF icon). |
| Stop-start standby indication |
PCM |
Input used to control auto stop-start indicator (1.0L only). |
| Tire pressure indication |
BCM |
Input used to control the TPMS indicator |
| Transmission mode display actual |
TCM |
Input used to control the select shift segment of the PRNDL display. |
| Transmission shift mode |
TCM |
Input used to control the PRNDL display. |
| Turn indicator command |
BCM |
Input used to control the RH/ LH turn or hazard indicators. |