Front Fog Lamp Adjustment

Front Fog Lamp Adjustment 

Adjustment 

1. 1.
   
   
   NOTE: Horizontal aim is not adjustable. Consult your state vehicle inspection center for recommended tolerance ranges for visual aiming.
   NOTE: Before starting fog lamp adjustment, entry conditions must be met.
   • Vehicle must be on level ground.
   • Tires must be correctly inflated.
   • Vehicle must be normally loaded.
   • Fog lamps and headlamps must be clean.
   • Headlamps must be operating and correctly aimed.

1. 2.
   
   
   NOTE: The vertical wall screen must be a minimum of 10ft (2.4m) wide.

   Park the vehicle on a level surface approximately 7.6 m (25 ft) from the vertical wall or screen directly in front of it.

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   The correct visual aim for the fog lamps is with the top edge of the high-intensity zone 101.6 mm (4 in) below the horizontal center of the fog lamps.

Courtesy of FORD MOTOR COMPANY