| B129C:12 |
Left Front Side Sensor: Circuit Short To Battery |
REFER to: Parking Aid
. |
| B129C:14 |
Left Front Side Sensor: Circuit Short To Ground Or Open |
REFER to: Parking Aid
. |
| B129C:96 |
Left Front Side Sensor: Component Internal Failure |
REFER to: Parking Aid
. |
| B129D:12 |
Right Front Side Sensor: Circuit Short To Battery |
REFER to: Parking Aid
. |
| B129D:14 |
Right Front Side Sensor: Circuit Short To Ground Or Open |
REFER to: Parking Aid
. |
| B129D:96 |
Right Front Side Sensor: Component Internal Failure |
REFER to: Parking Aid
. |
| B129E:11 |
Enable/Disable Switch - Semi-Automatic Advanced Parallel Park: Circuit Short To Ground |
REFER to: Parking Aid
. |
| B1303:11 |
Park Assist Switch: Short To Ground |
REFER to: Parking Aid
. |
| B1304:00 |
Electronic Power Assisted Steering: No Sub Type Information |
REFER to: Parking Aid
. |
| B1B36:12 |
Right Front Outer Sensor: Circuit Short To Battery |
GO to Pinpoint Test G |
| B1B36:14 |
Right Front Outer Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test H |
| B1B36:96 |
Right Front Outer Sensor: Component Internal Failure |
GO to Pinpoint Test I |
| B1B38:12 |
Right Front Inner Sensor: Circuit Short To Battery |
GO to Pinpoint Test G |
| B1B38:14 |
Right Front Inner Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test H |
| B1B38:96 |
Right Front Inner Sensor: Component Internal Failure |
GO to Pinpoint Test I |
| B1B40:12 |
Left Front Outer Sensor: Circuit Short To Battery |
GO to Pinpoint Test G |
| B1B40:14 |
Left Front Outer Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test H |
| B1B40:96 |
Left Front Outer Sensor: Component Internal Failure |
GO to Pinpoint Test I |
| B1B42:12 |
Left Front Inner Sensor: Circuit Short To Battery |
GO to Pinpoint Test G |
| B1B42:14 |
Left Front Inner Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test H |
| B1B42:96 |
Left Front Inner Sensor: Component Internal Failure |
GO to Pinpoint Test I |
| B1B44:12 |
Right Rear Outer Sensor: Circuit Short To Battery |
GO to Pinpoint Test E |
| B1B44:14 |
Right Rear Outer Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test D |
| B1B44:96 |
Right Rear Outer Sensor: Component Internal Failure |
GO to Pinpoint Test F |
| B1B46:12 |
Right Rear Inner Sensor: Circuit Short To Battery |
GO to Pinpoint Test E |
| B1B46:14 |
Right Rear Inner Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test D |
| B1B46:96 |
Right Rear Inner Sensor: Component Internal Failure |
GO to Pinpoint Test F |
| B1B48:12 |
Left Rear Outer Sensor: Circuit Short To Battery |
GO to Pinpoint Test E |
| B1B48:14 |
Left Rear Outer Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test D |
| B1B48:96 |
Left Rear Outer Sensor: Component Internal Failure |
GO to Pinpoint Test F |
| B1B50:12 |
Left Rear Inner Sensor: Circuit Short To Battery |
GO to Pinpoint Test E |
| B1B50:14 |
Left Rear Inner Sensor: Circuit Short To Ground Or Open |
GO to Pinpoint Test D |
| B1B50:96 |
Left Rear Inner Sensor: Component Internal Failure |
GO to Pinpoint Test F |
| B1B54:11 |
Function LED - Park Aid: Circuit Short To Ground |
GO to Pinpoint Test J |
| B1B54:12 |
Function LED - Park Aid: Circuit Short To Battery |
GO to Pinpoint Test J |
| B1B57:11 |
Front Sensors Power Circuit: Circuit Short To Ground |
GO to Pinpoint Test B |
| B1B58:11 |
Rear Sensors Power Circuit: Circuit Short To Ground |
GO to Pinpoint Test C |
| U0100:00 |
Lost Communication With ECM/PCM "A": No Sub Type Information |
GO to Pinpoint Test K |
| U0101:00 |
Lost Communication With TCM: No Sub Type Information |
GO to Pinpoint Test L |
| U0121:00 |
Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information |
GO to Pinpoint Test M |
| U0131:00 |
Lost Communication With Power Steering Control Module: No Sub Type Information |
GO to Pinpoint Test N |
| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to Pinpoint Test O |
| U0155:00 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
GO to Pinpoint Test P |
| U0164:00 |
Lost Communication With HVAC Control Module: No Sub Type Information |
GO to Pinpoint Test Q |
| U0253:00 |
Lost Communication With Accessory Protocol Interface Module: No Subtype Information |
GO to Pinpoint Test R |
| U0256:00 |
Lost Communication With Front Controls Interface Module "A": No Subtype Information |
GO to Pinpoint Test S |
| U0257:00 |
Lost Communication With Front Controls / Display Interface Module: No Subtype Information |
GO to Pinpoint Test T |
| U0401:00 |
Invalid Data Received From ECM/PCM "A": No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the PCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0402:00 |
Invalid Data Received From TCM: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the TCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0415:00 |
Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the ABS module with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network |
| U0420:00 |
Invalid Data Received From Power Steering Control Module: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the PSCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0422:00 |
Invalid Data Received From Body Control Module: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the BCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0423:00 |
Invalid Data received From Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the IPC with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0429:00 |
Invalid Data Received From Steering Column Control Module: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the SCCM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0554:00 |
Invalid Data Received From Accessory Protocol Interface Module: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the APIM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0557:00 |
Invalid Data Received From With Front Controls Interface Module "A": No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the IPC with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U0558:00 |
Invalid Data Received From Front Controls / Display Interface Module: No Sub Type Information |
This DTC sets when the PAM receives invalid network data from the FCDIM with a faulted signal data input. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the other modules on the network. |
| U2024: 41 |
Control Module Cal-Config Data: General Checksum Failure |
CLEAR the DTC and carry out the PAM self-test. If DTC U2024:41 is retrieved again, PROGRAM the PAM. REFER to: Module Configuration - System Operation and Component Description
. carry out the self-test. If DTC-U2024:41 is retrieved again, INSTALL a new PAM. Refer to: Parking Assist Control Module (PAM) - 4-Door . Refer to: Parking Assist Control Module (PAM) - 5-Door . |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
CLEAR the DTC and carry out the module self-test. If the DTC returns, INSTALL a new PAM. Refer to: Parking Assist Control Module (PAM) - 4-Door . Refer to: Parking Assist Control Module (PAM) - 5-Door . |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
CLEAR the DTC and carry out the self-test. If the DTC returns, INSTALL a new PAM. Refer to: Parking Assist Control Module (PAM) - 4-Door . Refer to: Parking Assist Control Module (PAM) - 5-Door . |
| U3000:44 |
Control Module: Data Memory Failure |
CLEAR the DTC and carry out the self-test. If the DTC returns, INSTALL a new. PAM. Refer to: Parking Assist Control Module (PAM) - 4-Door . Refer to: Parking Assist Control Module (PAM) - 5-Door . |
| U3000:45 |
Control Module: Program Memory Failure |
CLEAR the DTC and carry out the self-test. If the DTC returns, INSTALL a new. PAM. Refer to: Parking Assist Control Module (PAM) - 4-Door . Refer to: Parking Assist Control Module (PAM) - 5-Door . |
| U3000:46 |
Control Module: Calibration; Parameter Memory Failure |
CLEAR the DTC and carry out the self-test. If the DTC returns, INSTALL a new. PAM. Refer to: Parking Assist Control Module (PAM) - 4-Door . Refer to: Parking Assist Control Module (PAM) - 5-Door . |
| U3000:49 |
Control Module: Internal Electronic Failure |
CLEAR the DTC and carry out the self-test. If the DTC returns, INSTALL a new PAM. Refer to: Parking Assist Control Module (PAM) - 4-Door . Refer to: Parking Assist Control Module (PAM) - 5-Door . |