Selector Mechanism: Installation

WARNING: This page is about a different variant/trim than selected.

1.

GFD62751

Courtesy of FORD MOTOR COMPANY

2.

NOTE: Make sure that the mating faces are clean and free of foreign material.

Material: Gasket Maker / TA-16 (WSK-M2G348-A5)

GFD62752

Courtesy of FORD MOTOR COMPANY

3.

NOTE: Make sure that the wiring harness does not catch.

GFD62760

Courtesy of FORD MOTOR COMPANY

4.

NOTE: Note the different lengths of the bolts.
- 1.
  
  Torque: 19 lb.ft (26 Nm)
- 2.
  
  Torque: 19 lb.ft (26 Nm)

GFD62761

Courtesy of FORD MOTOR COMPANY

5.

Torque: 59 lb.ft (80 Nm)

GFD62757

Courtesy of FORD MOTOR COMPANY

6.

GFD62762

Courtesy of FORD MOTOR COMPANY

7.

WARNING: Make sure that a new bolt is installed.

Torque: 109 lb.ft (148 Nm)

GFD62756

Courtesy of FORD MOTOR COMPANY

8.

Refer to: Gearshift Cable Adjustment - 5-Speed Manual Transmission - MTX75 .

GFD62755

Courtesy of FORD MOTOR COMPANY

9.

Torque: 35 lb.ft (48 Nm)

GFD62369

Courtesy of FORD MOTOR COMPANY

10.

Refer to: Battery Tray .

11.

Remove the following items:
- Use the General Equipment: Wooden Block Use the General Equipment: Trolley Jack

GFD62754

Courtesy of FORD MOTOR COMPANY

12.

Refer to: Jacking and Lifting - Overview .

13.

Install engine undershield - If equipped.

14.

Refer to: Jacking and Lifting - Overview .