Roll Restrictor RH: Installation

WARNING: This page is about a different variant/trim than selected.

1.

Install the roll restrictor and the bolts and tighten in sequence shown.
Torque:

Stage 1: 35 lb.ft (48 Nm)

Stage 2: 92 lb.ft (125 Nm)

Fig 1: Roll Restrictor Tightening Sequence

GFD62767

Courtesy of FORD MOTOR COMPANY

2.
- 1.
  
  Install the underbody shield.
- 2.
  
  Install the air deflector.

GFD61488

Courtesy of FORD MOTOR COMPANY