Transmission Draining and Filling

Materials 

Filling 

• 1.
  
  With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking And Lifting (Except Electric) .

• 2.
  
  

  • 1.
    
    Remove the air deflector.

  • 2.
    
    Remove the underbody shield.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  

  • 1.
    
    
    NOTE: Be prepared to collect escaping fluid.

  Remove the drain plug and drain the transmission fluid.

• 2.
  
  Install the drain plug.

  Torque: 26 lb.ft (35 Nm)

Courtesy of FORD MOTOR COMPANY

• 4.
  
  Remove the fill plug.

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Add or remove transmission fluid as necessary. Refer to: Specifications .

  Material: Motorcraft ® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)

Courtesy of FORD MOTOR COMPANY

• 6.
  
  Install the fill plug.

  Torque: 26 lb.ft (35 Nm)

Courtesy of FORD MOTOR COMPANY

• 7.
  
  

  • 1.
    
    Install the underbody shield.

  • 2.
    
    Install the air deflector.

Courtesy of FORD MOTOR COMPANY