Fuel Tank and Lines - Overview

Overview 

The fuel system consists of:

• a Closed Loop Pressure Control System (CLPCS).

• a standard fuel tank.

• fuel, vapor and brake tubes in an integrated bundle assembly attached to the underside of the vehicle by retaining clips.

• a Fuel Tank Pressure (FTP) sensor (part of the fuel vapor tube assembly).

• a lifetime fuel filter (serviced as part of the Fuel Pump (FP) module).

• a Fuel Pump (FP) module that supplies fuel under pressure to the high pressure Fuel Pump (FP).

• a serviceable fuel level sender mounted on the Fuel Pump (FP) module.

• an Easy Fuel™ fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.

• a supplemental refueling adapter located in the spare tire compartment.

FP Shut-off Feature 

In the event of a moderate to severe collision, the vehicle is equipped with a FP shut-off feature that is initiated by the event notification signal.