Neutral Position Sensor - 2.3L EcoBoost (257kW/350PS) - MI4: Removal

WARNING: This page is about a different car, the 2016 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1.
- Remove the screws and the deflector shield.
- Remove the screws and the engine undershield.

Courtesy of FORD MOTOR COMPANY

2.

Disconnect the electrical connector.

Courtesy of FORD MOTOR COMPANY

3.

Remove the bolt and the neutral position sensor.
Torque: 106 lb.in (12 Nm)

Courtesy of FORD MOTOR COMPANY