LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Flex SE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center, And Warning Chimes >> Removal And Installation >> Instrument Panel Cluster (IPC) >> Removal

Instrument Panel Cluster (IPC): Removal

  1. 1.

    If installing a new IPC, upload the module configuration information to the scan tool. Refer to Module Configuration .

  1. 2.

    Remove the IPC finish panel. Refer to Instrument Panel and Console .

  1. 3.

    Lower the steering column to the lowest position.

  1. 4.

    Remove the 4 screws and the IPC.
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals