LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Flex SE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test I: The Tachometer Is Inoperative >> Notes

Pinpoint Test I: The Tachometer Is Inoperative: Notes

Diagnostic Overview 

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.

Normal Operation and Fault Conditions 

Refer to Tachometer in Instrument Panel Cluster (IPC) .

If the IPC does not receive the engine rpm data from the PCM for more than 5 seconds, the IPC sets DTC U0100:00 in continuous memory and defaults the tachometer to 0 rpm.

Possible Sources