LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Flex SE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation, Message Center, And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test H: The Odometer Is Inoperative >> Pinpoint Test H : The Odometer Is Inoperative

Pinpoint Test H : The Odometer Is Inoperative

  1. H1 RETRIEVE THE RECORDED DTCs FROM THE PCM KOEO SELF-TEST

    • Ignition ON.
    • Using a scan tool, perform the PCM KOEO self-test.

    Are any DTCs recorded? 

    Yes  REFER to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID)
    No  GO to  H2.

  2. H2 CHECK FOR CORRUPTED NVM

    • Observe the message center display area.

    Does the odometer display ERROR? 

    Yes  INSTALL a new IPC. REFER to Instrument Panel Cluster (IPC) .
    No  GO to  H3.

  3. H3 RETRIEVE THE RECORDED DTCs FROM THE IPC SELF-TEST

    • Using a scan tool, perform the IPC self-test.

    Are any DTCs recorded? 

    Yes  For DTC U0100:00, GO to Pinpoint Test AS . For all other DTCs, REFER to DTC Chart - IPC in DTC Chart(s) 
    No  INSTALL a new IPC. REFER to Instrument Panel Cluster (IPC) .
scientia non olet · About LEMON Manuals