Dealer Test Mode
To enter the IPC dealer mode, begin with the ignition in the OFF mode. Press and hold the LH steering wheel switch OK button. Place the ignition in the ON mode and hold the button until the dealer test mode popup window appears, usually within 3 to 5 seconds. Press the up or down arrow buttons to navigate through each of the display windows. To exit the IPC self-test mode, press and hold the OK button for 3-5 seconds or place the ignition in the OFF mode. The dealer test mode displays multiple items in a viewing window on the LH side of the IPC . Each button press advances the viewing window to the next set of items.
NOTE:
The table below lists the displays as they appear when navigating using the down arrow button.
| Button Press | Viewing Window Content | Information Display | Description |
|---|---|---|---|
| 1 | Part Number Information (base IPC ) | PartNo: xxxx-xx Core: xxxx-xx Cal#: xxxx-xx ECU S/W: xxxxxx |
Displays the alphanumeric prefix and suffix of the IPC part number. |
| 1 | Part Number Information (optional IPC ) | xxxx-xx xxxx-xx xxxx-xx xxxx-xx |
Displays the alphanumeric prefix and suffix of the IPC part number. |
| 2 | Fuel Level (Dual Fuel Sender) | Inst Fuel1: xxx FLPM1: xxxx.x FLPM: xxxx.x |
Displays the primary (fuel pump assembly) fuel level and average fuel level. |
| 3 | Fuel Level (Dual Fuel Sender) | Inst Fuel2: xxx FLPM2: xxxx.x FLPM: xxxx.x |
Displays the secondary (fuel level sensor) fuel level and average fuel level. |