Information Center - Instrumentation, Message Center, And Warning Chimes
- Description And Operation
- Instrument Panel Cluster (IPC)
- Information And Message Center
- Notes
- Information Mode
- Setup Mode
- Performance Mode Configuration (Shelby GT500 Only)
- System Check
- Oil Life and Oil Life Start Value
- Electronic Compass
- Vehicles Without Navigation
- Vehicles With Navigation
- Compass Accuracy (Without Navigation)
- System Warning Messages
- Body
- Chassis
- General Powertrain
- MyKey™
- TracKey (If Equipped)
- Service Procedure Displays
- Tire Pressure Monitoring System (TPMS)
- Warning Chimes
- Diagnosis And Testing
- Instrumentation, Message Center and Warning Chimes
- Notes
- Principles of Operation
- Notes
- Instrument Panel Cluster (IPC)
- Information And Message Center
- Warning Chimes
- Notes
- Warning Chime Characteristics
- IPC Chime Characteristics
- Air Bag Secondary Warning Chime
- Belt-Minder®
- Headlamps On Warning Chime
- Key-In-Ignition Warning Chime
- Message Center Warning Chime
- Parking Brake Warning Chime
- Performance Shift Warning Chime
- Perimeter Alarm Chime
- Safety Belt Warning Chime
- Turn Signal Left On Warning Chime
- Turn/Hazard On Tone
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The Instrument Panel Cluster (IPC) Is Inoperative
- Pinpoint Test B: Incorrect Fuel Gauge Indication
- Pinpoint Test C: The Engine Temperature Gauge Is Inoperative
- Pinpoint Test D: Incorrect Engine Temperature Gauge Indication
- Pinpoint Test E: The Tachometer Is Inoperative
- Pinpoint Test F: Incorrect Tachometer Indication
- Pinpoint Test G: The Speedometer Is Inoperative
- Pinpoint Test H: Incorrect Speedometer Indication
- Pinpoint Test I: The Virtual Accelerometer/Track Applications Functions Are Inoperative (If Equipped)
- Pinpoint Test J: A Virtual Gauge Is Inoperative (Except Accelerometer And Voltage Gauges) (If Equipped)
- Pinpoint Test K: The Virtual Voltage Gauge Is Inoperative (If Equipped)
- Pinpoint Test L: The Odometer Is Inoperative
- Pinpoint Test M: The Low Oil Pressure Warning Indicator Is Never/Always On
- Pinpoint Test N: The Engine Over-Temperature Warning Indicator Is Never/Always On (Base IPC)
- Pinpoint Test O: The Brake Warning Indicator is Never On
- Pinpoint Test P: The Brake Warning Indicator is Always On
- Pinpoint Test Q: The ABS Warning Indicator Is Never/Always On
- Pinpoint Test R: The Air Bag Warning Indicator Is Never/Always On
- Pinpoint Test S: The Safety Belt Warning Indicator Is Never/Always On
- Pinpoint Test T: The Door Ajar Warning Indicator Is Never/Always On
- Pinpoint Test U: The Malfunction Indicator Lamp (MIL) Is Never/Always On
- Pinpoint Test V: The Powertrain Malfunction (Wrench) Warning Indicator Is Never/Always On (Base IPC)
- Pinpoint Test W: The Grade Assist Indicator is Never/Always On
- Pinpoint Test X: The Charging System Warning Indicator Is Never/Always On
- Pinpoint Test Y: The High Beam Indicator Is Never/Always On
- Pinpoint Test Z: The LH/RH Turn Indicator Is Never/Always On
- Pinpoint Test AA: The Cruise Control Indicator Is Never/Always On
- Pinpoint Test AB: The Stability/Traction Control Indicator (Sliding Car Icon) Is Never/Always On
- Pinpoint Test AC: The Stability/Traction Control Disabled Indicator (Sliding Car OFF Icon) Is Never/Always On
- Pinpoint Test AD: The Low Fuel Warning Indicator Is Never/Always On
- Pinpoint Test AE: The Performance Shift Indicator Is Never/Always On (GT500)
- Pinpoint Test AF: The Shift Indicator Is Never/Always On (GT500)
- Pinpoint Test AG: The Tire Pressure Monitoring System (TPMS) Warning Indicator Is Never/Always On
- Pinpoint Test AH: The Anti-Theft Indicator Is Never/Always On
- Pinpoint Test AI: The Message Center Is Not Operating Correctly
- Pinpoint Test AJ: The Compass Is Inoperative
- Pinpoint Test AK: The Compass Is Inaccurate
- Pinpoint Test AL: The CHECK FUEL FILL INLET Message Is Inoperative/Always On
- Pinpoint Test AM: The Key-In-Ignition Warning Chime Is Inoperative
- Pinpoint Test AN: The Headlamps On Warning Chime Is Inoperative
- Pinpoint Test AO: The Chime Sounds When The Driver Door Is Ajar (No Key In Ignition And Headlamps Off)
- Pinpoint Test AP: The Performance Shift Warning Chime Does Not Operate Correctly
- Pinpoint Test AQ: The Safety Belt Warning Chime Does Not Operate Correctly/The Belt-Minder® Feature Does Not Operate Correctly
- Pinpoint Test AR: The Turn Signal On Warning Chime Is Inoperative
- Pinpoint Test AS: DTC U0100:87
- Pinpoint Test AT: DTC U021:00 And U0121:87
- Pinpoint Test AU: DTC U0131:87
- Pinpoint Test AV: DTC U0140:87
- Pinpoint Test AW: DTC U0142:87
- Pinpoint Test AX: DTC U0151:87
- Pinpoint Test AY: DTC U0159:00
- Pinpoint Test AZ: DTC U0164:87
- Pinpoint Test BA: DTC U0184:87
- Pinpoint Test BB: DTC U3003:16
- Pinpoint Test BC: DTC U3003:17
- Pinpoint Test BD: DTC U300A:94
- Pinpoint Test BE: DTC U0122:87
- Pinpoint Test BF: The LOW OIL LEVEL Warning Message Is Always On (The Oil Level Is OK [5.0L Only])
- Instrumentation, Message Center and Warning Chimes
- General Procedures
- Removal And Installation