Muffler and Tailpipe: Removal

WARNING: This page is about a different car, the 2016 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1.

With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .

2.
- Remove and discard the nuts.
  Torque: 35 lb.ft (48 Nm)
- Position aside the muffler and tailpipe.

Courtesy of FORD MOTOR COMPANY

3.

Remove and discard the gasket.

Courtesy of FORD MOTOR COMPANY

4.

Detach the exhaust isolators hangers and remove the muffler and tailpipe assembly.

Courtesy of FORD MOTOR COMPANY