Symptom Chart: Supplemental Restraint System

WARNING: This page is about a different car, the 2017 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Condition	Possible Sources	Actions
A module does not respond to the diagnostic scan tool	Fuse Diagnostic scan tool DLC Wiring, terminals or connectors Module	REFER to: Module Communications Network (Hybrid/Energi) .
An audible tone sounds within 60 seconds of ignition ON	SRS fault or airbag warning indicator fault	CARRY OUT the RCM and IPC self-tests. For RCM Diagnostic Trouble Codes (DTCs), refer to DTC Chart: Restraint Control Module (RCM) . For IPC Diagnostic Trouble Codes (DTCs), REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES - 2.0L DURATEC - HYBRID (96KW/130PS) .
The airbag indicator is flashing	SRS fault	CARRY OUT the RCM and OCSM self tests. Refer to DTC Chart: Restraint Control Module (RCM) or DTC Chart: Occupant Classification System Module (OCSM) .
The airbag warning indicator is illuminated continuously	Fuse Wiring, terminals or connectors IPC RCM or OCSM	CARRY OUT RCM and OCSM self tests. REFER to DTC Chart: Restraint Control Module (RCM) or REFER to DTC Chart: Occupant Classification System Module (OCSM) . If no Diagnostic Trouble Codes (DTCs) were retrieved from the RCM or OCSM, REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES - 2.0L DURATEC - HYBRID (96KW/130PS) . If the OCSM or RCM does not respond to the diagnostic scan tool, REFER to: COMMUNICATIONS NETWORK - 2.0L DURATEC - HYBRID (96KW/130PS) or NO COMMUNICATION BETWEEN THE INTEGRATED DIAGNOSTIC SYSTEM (IDS) AND THE VEHICLE .