LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 1693 (Charging System (Battery, Battery Mounting And Battery Cables) (Hybrid/ENERGI)) >> General Procedures >> Battery Disconnect and Connect

Battery Disconnect and Connect

WARNING: This page is about a different car, the 2017 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect 

  1. WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

    GFD198676Courtesy of FORD MOTOR COMPANY
    GFD198677Courtesy of FORD MOTOR COMPANY
  2. NOTE: When disconnecting the battery cable to interrupt power to the vehicle electrical system, disconnect the battery ground cable only. It is not necessary to disconnect the positive battery cable.

    1. Torque: 44 lb.in (5 Nm)
    2. Torque: 80 lb.in (9 Nm)

GFD198678Courtesy of FORD MOTOR COMPANY

Connect 

  1. To install, reverse the removal procedure.