Brake Vacuum Pump - 2.0L EcoBoost (184kW 250PS) - MI4: Removal
WARNING: This page is about a different car, the 2016 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- 1.
Remove the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe - 2.0L EcoBoost (184kW/250PS) - MI4.
- 2.
Squeeze the sides of the coupling and disconnect the vacuum tube.
- 3.
Remove the bolts and the brake vacuum pump.Torque
: 89 lb.in (10 Nm)
- 4.
Inspect the gasket and install a new gasket as necessary.