Warning Chimes - Overview: Overview

The warning chimes provide the driver with audible warnings that act as reminders and supplemental alerts to visual IPC  indications such as gauges, indicators and message center warnings. The IPC  controls all warning chimes based on messages received from external modules. The IPC  prioritizes the chimes according to a preset hierarchy programmed into the IPC  software. When more than one chime request is received by the IPC  , the most important chime sounds. If a lower priority chime is currently sounding, the higher priority request takes over and replaces or delays the lower priority chime.

The warning chimes are sounded through the audio system speakers and the IPC  . The turn signal on (tick-tock) is the only individual chime that the IPC  is responsible for sounding. The parking aid and Blind Spot Information System (BLIS)/Cross Traffic Alert (CTA) warning chimes are sounded through the rear speakers. All other warning chimes are sounded through the front audio system speakers.

The IPC  also acts as a backup. In the event of an audio system chime failure, the IPC  sounds all chimes that are required.