Rear Seat Backrest Latch: Removal
NOTE:
Removal steps in this procedure may contain installation details.
-
WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in GENERAL INFORMATION -- (HYBRID) . Failure to follow this instruction may result in serious personal injury.
Refer to: HEALTH AND SAFETY PRECAUTIONS .
- Refer to: REAR SEAT CUSHION .
- To install:
Torque : 35 lb.ft (48 Nm)
NOTE: It is necessary to remove the 40 percent seatback side before the 60 percent will release. - To install:
Torque : 44 lb.in (5 Nm)
- To install:
Torque : 18 lb.ft (24 Nm)