Pinpoint Test BD: The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative

• Ignition OFF.
• Ignition ON.
• Unbuckle the driver safety belt.
• Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

Does the safety belt warning chime operate for approximately 6 seconds? 

• Yes:  GO to BD2 
• No:  INSTALL a new IPC.

  REFER to: INSTRUMENT PANEL CLUSTER (IPC) .

• Verify the RH and LH turn signal indicators operate correctly.

Do the turn signal indicators operate correctly? 

• Yes:  GO to BD3 
• No:  GO to PINPOINT TEST L 

• Using a diagnostic scan tool, perform the BCM self-test.

Are any Diagnostic Trouble Codes (DTCs) recorded? 

• Yes:  REFER to: BODY CONTROL MODULE (BCM) .
• No:  DIAGNOSE all GWM Diagnostic Trouble Codes (DTCs).

  REFER to: COMMUNICATIONS NETWORK - 2.0L DURATEC - HYBRID (96KW/130PS) .