Pinpoint Test BA: The Parking Brake Warning Chime Is Inoperative

• Ignition OFF.
• Ignition ON.
• Unbuckle the driver safety belt.
• Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

Does the safety belt warning chime operate for approximately 6 seconds? 

• Yes:  GO to BA2 
• No:  INSTALL a new IPC.

  REFER to: INSTRUMENT PANEL CLUSTER (IPC) .

• Apply the parking brake.
• Observe the brake warning indicator.

Does the brake warning indicator illuminate? 

• Yes:  GO to BA3 
• No:  GO to PINPOINT TEST I 

• Using a diagnostic scan tool, perform the IPC self-test.

Are any Diagnostic Trouble Codes (DTCs) recorded? 

• Yes:  REFER to DTC CHART: IPC .
• No:  GO to BA4 

• Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (DTCs).

Are any Diagnostic Trouble Codes (DTCs) recorded? 

• Yes:  REFER to: COMMUNICATIONS NETWORK - 2.0L DURATEC - HYBRID (96KW/130PS) .
• No:  DIAGNOSE all BCM Diagnostic Trouble Codes (DTCs).

  REFER to: BODY CONTROL MODULE (BCM) .