LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Focus ST >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes -- (Except Electric) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> PINPOINT TEST BD: The Low Fuel Warning Chime Is Inoperative Or Always Sounds >> Pinpoint Test BD: The Low Fuel Warning Chime Is Inoperative Or Always Sounds

Pinpoint Test BD: The Low Fuel Warning Chime Is Inoperative Or Always Sounds

  1. BD1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    1. Yes  : GO to BD2 
    2. No  : GO to PINPOINT TEST BJ 
  2. BD2 CHECK THE LOW FUEL INDICATOR 
    • Verify that the low fuel indicator is operating correctly.

    Does the low fuel indicator operate correctly? 

    1. Yes  : INSTALL a new IPC  .

      REFER to: INSTRUMENT PANEL CLUSTER (IPC) .

    2. No  : GO to PINPOINT TEST AK 
scientia non olet · About LEMON Manuals