Diagnostic Overview
Refer to OEM WIRING DIAGRAMS EXCEPT ELECTRIC--> for schematic and connector information.
The RCM monitors the RH front impact severity sensor circuits for the following faults:
- Open circuit
- Short to voltage
- Short to ground
- Faulted RH front impact severity sensor
If a fault is detected, the RCM stores DTC B0095:11, B0095:81 or B0095:93 in memory and sends a message to the IPC to illuminate the airbag warning indicator.
DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B0095:11 | Right Frontal Restraints Sensor: Circuit Short to Ground | A fault is indicated when the RCM senses a short to ground on the RH front impact severity sensor feed circuit. |
| B0095:81 | Right Frontal Restraints Sensor: Invalid Serial Data Received | A fault is indicated when the RCM senses a faulted RH front impact severity sensor or an open circuit on the sensor feed or return circuits. |
| B0095:93 | Right Frontal Restraints Sensor: No Operation | A fault is indicated when the RCM senses a faulted RH front impact severity sensor or a short to voltage on the sensor feed circuit. |