Pinpoint Test C : The Visual Park Aid Alert Is Inoperative: Notes
WARNING: This page is about a different car, the 2015 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to PARKING AID for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
Possible Causes
- The feature is disabled
- Rear parking aid camera configuration
- Audible parking aid system concern
- APIM concern
- BCM concern
Visual Inspection and Diagnostic Pre-Checks
- If the rear parking aid camera is not configured after replacement, some video functions will be inoperative. Verify the rear parking aid camera configuration using the diagnostic scan tool.
- Verify that the visual parking aid alert is enabled in the using the FDIM settings menu.
NOTE:
Before disconnecting the rear parking aid camera, verify the connector is properly seated and latched.