LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger - 3.5L GTDI >> Removal And Installation >> Turbocharger Oil Supply Tube - RH >> Removal

Turbocharger Oil Supply Tube - RH: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING
  2. Remove the engine appearance cover.
    G09570906
  3. Remove the cowl panel. Refer to FRONT END BODY PANELS
  4. Detach the 2 brake booster vacuum hose retainers from the strut tower brace.
    G09571025
  5. Remove the 4 nuts and the strut tower brace
    G09571026
    • Disconnect the LH turbocharger bypass valve electrical connector and the turbocharger bypass valve hose.
    • Remove the turbocharger wastegate regulating valve hose from the RH Charge Air Cooler (CAC) tube.
    • Remove the RH CAC tube nut from the intake manifold.
      G09571027
    • Loosen the clamp and remove the RH CAC tube.
    • Disconnect the RH turbocharger bypass valve electrical connector.
    • Disconnect the RH turbocharger bypass valve hose.
    • Loosen the clamp and remove the RH CAC tube from the RH turbocharger.
      G09571028
  8. Detach the HO2S  electrical connector and remove the nut and HO2S  connector bracket from the engine front cover.
    G09571029
  9. Remove the RH oil supply tube secondary latch.
    G09571030
  10. Using the Spring Lock Coupling Disconnect Tool, remove the RH oil supply tube from the quick connect fitting. Refer to FUEL SYSTEM - GENERAL INFORMATION
    G09571031
  11. Remove the RH engine lifting eye and the 2 bolts.
    G09571032
  12. Remove the RF  tire. Refer to WHEELS AND TIRES
  13. Remove the 3 turbocharger heat shield bolts and the turbocharger heat shield.
    G09571033
  14. Remove the RH turbocharger oil supply tube banjo bolt and the RH turbocharger oil supply tube.
    G09571034
scientia non olet · About LEMON Manuals