Pinpoint Test O: The Active Park Assist System Does Not Offer Available Parking Spaces

O1 PERFORM A NETWORK TEST
- Using a scan tool, perform the network test.
Do all modules pass the network test?
- Yes : GO to O2 .
- No : MODULE COMMUNICATIONS NETWORK
O2 CHECK THE PAM CMDTCs
- Using a scan tool, check the PAM CMDTCs .
Are any DTCs present?
- Yes : DIAGNOSE all PAM DTCs . REFER to PARKING AID - AUDIBLE .
- No : GO to O3 .
O3 CHECK THE STEERING WHEEL ROTATION SENSOR
- Using a scan tool, view the SCCM PID : SW_ANGLE
Is the PID value within 45° of the actual steering wheel angle?
- Yes : The system is operating correctly at this time. The concern may have been caused by the vehicle operating conditions.
- No : PERFORM the clockspring adjustment procedure and RECHECK the PID . REFER to SUPPLEMENTAL RESTRAINT SYSTEM . If the PID value is not within 45° of the actual steering wheel angle after the clockspring adjustment is complete, INSTALL a new steering wheel rotation sensor. ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL .