LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Instrument Cluster Illumination And Panel Illumination >> Removal And Installation >> Instrument Panel Dimmer Switch >> Removal and Installation

Removal and Installation

  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. NOTE: The instrument panel dimmer switch is removed by releasing the tabs and pulling from behind.

    Release the tabs and remove the instrument panel dimmer switch assembly.

  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals