Warning Chimes Symptom Chart

WARNING CHIMES SYMPTOM CHART

Condition	Possible Sources	Action
All the chimes are inoperative	IPC	VERIFY the IPC gauges and indicators are functioning correctly. If the IPC gauges and indicators are not functioning correctly, GO to PINPOINT TEST A . If the IPC gauges and indicators are functioning correctly, INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.
The chime always sounds	Refer to the Diagnostic Routine	GO to PINPOINT TEST AJ .
The adaptive cruise control warning chime is inoperative	Cruise control system IPC	VERIFY the adaptive cruise control display functions in the message center when the adaptive cruise control is in operation. If the adaptive cruise control display functions correctly, INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation. If the adaptive cruise control display does not operate, REFER to GO to SYMPTOM CHART - INFORMATION AND MESSAGE CENTER to diagnose the adaptive cruise control gap and speed settings are never displayed symptom.
The air bag secondary warning chime is inoperative/has activated	IPC	RETRIEVE the recorded DTCs from the IPC self-test. If IPC DTC P1534:01 is not present, the system is operating correctly. The air bag secondary warning chime sounds only when a fault in the air bag warning indicator is present and DTC P1534:01 is recorded. If IPC DTC P1534:01 is present, INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) .
The Belt-Minder® feature does not operate correctly	Refer to the Diagnostic Routine	GO to PINPOINT TEST AP .
The BLIS® /CTA warning chime is inoperative	Refer to the Diagnostic Routine	GO to PINPOINT TEST AK .
The door ajar warning chime is inoperative	Door ajar indication concern BCM IPC	VERIFY the safety belt warning chime operates for 6 seconds following ignition ON. If the safety belt warning chime sounds, GO to PINPOINT TEST AB to diagnose the door ajar message center warning indicator. If the safety belt warning chime does not sound, INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) .
The headlamps on warning chime is inoperative	Refer to the Diagnostic Routine	GO to PINPOINT TEST AL .
The key-in-ignition warning chime is inoperative	Refer to the Diagnostic Routine	GO to PINPOINT TEST AM .
The memory-stored feedback chime is inoperative	Refer to the Diagnostic Routine	GO to PINPOINT TEST AN .
The message center warning chime is inoperative	IPC	DISCONNECT the brake fluid level switch and VERIFY that the message center warning chime sounds when the message center displays CHECK BRAKE SYSTEM. If the message center warning chime sounds when the CHECK BRAKE SYSTEM message appears, the system is operating correctly at this time. The message center warning chime only sounds when the message center displays a new warning message. If the message center warning chime does not sound when the CHECK BRAKE SYSTEM message appears, INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.
The parking brake warning chime is inoperative	Refer to the Diagnostic Routine	GO to PINPOINT TEST AO .
The perimeter alarm warning chime is inoperative	Perimeter alarm concern IPC	VERIFY the perimeter alarm functions correctly and the headlamps on warning chime operates with the headlamps on, ignition OFF and the driver door open. If the perimeter alarm functions correctly and the headlamps on warning chime sounds, REFER to ANTI-THEFT - PERIMETER to diagnose the perimeter alarm. If the perimeter alarm functions correctly and the headlamps on warning chime does not sound, INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) . If the perimeter alarm does not operate correctly, REFER to ANTI-THEFT - PERIMETER .
The safety belt warning chime does not operate correctly	Refer to the Diagnostic Routine	GO to PINPOINT TEST AP .
The service AdvanceTrac® warning chime is inoperative	Stabilty-traction control indication concern IPC	VERIFY the headlamps on warning chime operates with the headlamps on, ignition OFF and the driver door open. If the headlamps on warning chime sounds, GO to PINPOINT TEST O to diagnose the stability-traction control indicator (sliding car icon). If the headlamps on warning chime does not sound, INSTALL a new IPC . REFER to INSTRUMENT PANEL CLUSTER (IPC) .
The turn/hazard on warning chime is inoperative	Refer to the Diagnostic Routine	GO to PINPOINT TEST AQ .
The turn signal left on warning chime is inoperative	Refer to the Diagnostic Routine	GO to PINPOINT TEST AR .