LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) And Stability Control >> Diagnosis And Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Diagnostic Routines >> Pinpoint Test I: DTCs C101A:15, C101A:16 and C101A:29 >> Visual Inspection and Diagnostic Pre-checks

Visual Inspection and Diagnostic Pre-checks

Inspect the brake booster for vacuum leaks.

Inspect the brake booster for any obvious signs of damage.

Inspect the brake booster vacuum sensor harness and connector of any obvious signs of damage.

Make sure the brake booster vacuum sensor electrical connector is free from any corrosion or other contaminants.

scientia non olet · About LEMON Manuals