LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System Actuation >> Removal And Installation >> Adjustable Pedals Control Switch >> Removal and Installation

Removal and Installation

NOTE: Turn the steering wheel 90 degrees to the left to access the adjustable pedals control switch screws.
  1. Remove the steering column shrouds. For additional information, refer to STEERING COLUMN .
  2. Remove the adjustable pedals control switch screw.
    • To install, tighten to 3 Nm (27 lb-in).
  3. Using a suitable tool (such as a pocket screwdriver), carefully disengage the control switch locking tabs one at a time, then remove the adjustable pedals control switch.
  4. To install, reverse the removal procedure.