LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Passive Anti-Theft System (Pats) (With Intelligent Access) >> Removal And Installation >> Passive Start Antenna - Center >> Removal and Installation

Removal and Installation

  1. Remove the floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Pull the red lock tab outward and disconnect the center passive start antenna electrical connector.
  3. Remove the 2 screws and the center passive start antenna.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals