LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seat System - Seats >> Removal And Installation >> Seat Cushion Heater Mat - Second Row, 40 Percent >> Installation

Seat Cushion Heater Mat - Second Row, 40 Percent: Installation

  1. Position a new cushion foam pad with a heater mat onto the cushion frame.
  2. Connect the cushion heater mat electrical connector.
  3. Install the cushion trim cover. For additional information, refer to SEAT CUSHION COVER - SECOND ROW, 40 PERCENT  in this article.
scientia non olet · About LEMON Manuals