LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seat System - Seats >> Removal And Installation >> Seat Cushion Heater Mat - Front >> Removal and Installation

Removal and Installation

NOTE: Driver seat shown in illustration, passenger seat similar.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the seat cushion cover. Refer to SEAT CUSHION COVER - FRONT .
  2. G09574773
  3. NOTE: Do not reuse the old cushion heater mat or foam pad.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals