Removal and Installation

NOTE: For parts identification and location, refer to SEAT - EXPLODED VIEW, SECOND ROW in this article.

Remove the 2 head restraint guides sleeves. For additional information, refer to HEAD RESTRAINT GUIDE SLEEVE in this article.
Release the backrest cover J-clips.

Fig 1: Locating Backrest Cover J-Clips
Courtesy of FORD MOTOR CO.
NOTE: Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.

Remove the hog rings, separate the hook-and-loop strips, invert the backrest cover all the way up and remove.
To install, reverse the removal procedure.