LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Flex SEL, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Parking Aid System - Active Park Assist >> General Procedures >> Active Park Assist Switch >> Removal and Installation

Removal and Installation

  1. Remove the floor console trim panel. For additional information, refer to Console - Floor in INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the electrical connector.
  3. Release the retaining tabs and remove the active park assist switch from the floor console.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals