Brake Vacuum Pump - 1.6L EcoBoost (132kW/180PS) - Sigma: Installation

NOTE: If the brake vacuum pump is not secured within 10 minutes of sealant application, the sealant must be removed and the sealing area cleaned with metal surface prep. Failure to follow this procedure can cause future oil leakage.

Material : Flange Sealant - Anaerobic/Loctite® 51031 (WSK-M2G348-A7)
NOTE: Manually align the brake vacuum pump drive key with the camshaft slot before installation.

To install, reverse the removal procedure.