LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Fiesta Titanium, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation - Brake Booster >> Removal and Installation >> Brake Vacuum Pump - 1.0L EcoBoost (90kW/120PS) >> Installation

Brake Vacuum Pump - 1.0L EcoBoost (90kW/120PS): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: If the brake vacuum pump is not secured within 10 minutes of sealant application, the sealant must be removed and the sealing area cleaned with metal surface prep. Failure to follow this procedure can cause future oil leakage.

    To install, reverse the removal procedure.

    Material  : Flange Sealant - Anaerobic/Loctite® 51031 (WSK-M2G348-A7)

    G08637465
scientia non olet · About LEMON Manuals