Pinpoint Test D : The Roof Opening Panel Is Noisy During Operation
WARNING: This page is about a different car, the 2015 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- D1 CHECK THE ROOF OPENING PANEL GLASS FOR OBSTRUCTIONS OR DAMAGE
- Check the roof opening panel for any obstructions and damage.
Are there any obstructions and/or damage?
Yes REMOVE all obstructions. REPAIR the roof opening panel as necessary. No GO to D2 - D2 CHECK THE ROOF OPENING PANEL GLASS OPERATION
- Check the roof opening panel glass during operation.
Is the roof opening panel loose or incorrectly aligned?
Yes ALIGN the roof opening panel. REFER to: Roof Opening Panel Alignment . No GO to D3 - D3 CHECK THE ROOF OPENING PANEL TRACKS
- Open the roof opening panel glass.
- Check the roof opening panel tracks for obstructions and damage.
Are the roof opening panel tracks OK?
Yes GO to D4 No REMOVE all obstructions. REPAIR any damage as necessary. - D4 CHECK THE ROOF OPENING PANEL SHIELD (SUNSHADE)
- Check the roof opening panel shield (sunshade) for correct movement.
Is the roof opening panel shield moving correctly?
Yes GO to D5 No REPAIR or INSTALL a new roof opening panel shield (sunshade) as necessary. REFER to: Roof Opening Panel Shield . - D5 CHECK THE ROOF OPENING PANEL MOTOR
- Gain access to the roof opening panel motor.
- Open the roof opening panel.
Does the motor make excessive noise?
Yes INSTALL a new roof opening panel motor/module. REFER to: Roof Opening Panel Motor . No ALIGN the roof opening panel glass. REFER to: Roof Opening Panel Alignment .