Pinpoint Test B: Outer Edge/Shoulder Wear

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

B1 MEASURE THE TREAD DEPTH
- Using a tread depth gauge or similar tool, measure the outside edge/shoulder tread depth.
- Is the tread depth greater than 2/32 inch?
  - Yes : ROTATE the wheel and tire assemblies. REFER to Wheel and Tire Rotation .
    CHECK and ADJUST the toe to nominal -0.15 degrees (toe out). CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .
  - No : INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to SUSPENSION SYSTEM - GENERAL INFORMATION .