Normal Operation
WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
The operating voltage required to supply the ABS module, hydraulic pump and isolation valves is in a range between 9 and 16 volts and vehicle speed is be greater than 5 km/h (3 mph).
- DTC B1317 (Battery Voltage High) - a continuous and on-demand DTC that sets if the voltage supplied to the ABS module is above 16 volts during the ABS module self-test or normal operation and vehicle speed is greater than 5 km/h (3 mph).
This pinpoint test is intended to diagnose the following:
- Charging system concern
- ABS module