Component testing procedure - Window adjust switch, rear
WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE - WINDOW ADJUST SWITCH, REAR
| Circuit to test |
Connect self-powered test light or ohmmeter to terminals |
Move switch to these positions |
A good switch will indicate |
| Up switch circuit |
1 and 4 11 and 9 |
Up |
Closed circuit |
| Down switch circuit |
1 and 9 11 and 4 |
Down |
Closed circuit |